Safety data sheet. GHS / OSHA HCS 2012 format, 16 sections. Issued by Epic Peptides Lab for the catalogue items listed in Section 1.

Epic Peptides Lab

Safety data sheet · lyophilized powder, vial

Epic Peptides Lab · USA

Document number
PL-SDS-128
Revision
1.0 · 2026-10-03

Pinealon

lyophilized powder, vial

1Identification

Product Identifier
Pinealon
Document Number
PL-SDS-128
Catalogue Items Covered
  • Id
    2071
    Name
    Pinealon 20mg
    Sku
    PL-PINEALON-20MG-VIAL
  • Id
    2060
    Name
    Pinealon 10mg
    Sku
    PL-PINEALON-10MG-VIAL
  • Id
    2055
    Name
    Pinealon 5mg
    Sku
    PL-PINEALON-5MG-VIAL
Recommended Use
Laboratory research use by trained personnel.
Restrictions On Use
Not for human or veterinary use.
Supplier / Distributor
Epic Peptides Lab, USA
Telephone
+1 (787) 468-5291
Email
info@epicpeptideslab.com

2Hazard(s) identification

Classification
Not classified as hazardous under OSHA HCS 2012 (29 CFR 1910.1200) or UN GHS, on the basis of the supplier safety data sheets consulted.
Label Elements
No data available.
Signal Word
No data available.
Other Hazards
No data available.

3Composition / information on ingredients

Description
Lyophilized (freeze-dried) powder or cake in a sealed glass vial with a rubber stopper and aluminium crimp cap.
Composition
  • Name
    Pinealon
    Full
    Glu-Asp-Arg (EDR)
    Cas
    175175-23-2
    Formula
    C15H26N6O8
    Conc
    ≥ 95% (dry basis, as supplied)
    Qty
    5 mg, 10 mg, 20 mg per vial

4First-aid measures

First Aid Measures
Inhalation
Move the person to fresh air and keep comfortable for breathing. If breathing is difficult or symptoms persist, call a POISON CENTER or doctor.
Skin
Take off contaminated clothing. Wash the skin with plenty of soap and water. If irritation or a rash develops, get medical advice.
Eyes
Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do; continue rinsing. If eye irritation persists, get medical advice.
Ingestion
Rinse mouth. Do not induce vomiting. Call a POISON CENTER or doctor if you feel unwell.
Most Important Symptoms And Effects
No specific symptoms are known. Pharmacologically active material: systemic effects consistent with its mechanism of action are possible after accidental injection, ingestion or absorption.
Likely Routes Of Exposure
Inhalation of dust, skin and eye contact when the vial is opened or the powder is weighed; ingestion through contaminated hands; accidental injection when reconstituted solutions are drawn into syringes.

5Fire-fighting measures

Fire Fighting Information
Combustible organic solid; finely divided powder may form dust clouds. Not flammable in the quantities supplied.

6Accidental release measures

Spill And Clean Up Procedures
Avoid dust formation. Dampen spilled powder with water, wipe up with absorbent material, place in a sealed container for disposal and clean the area with water and detergent.

7Handling and storage

Safe Handling
Open vials only in a clean area. Avoid generating or inhaling dust; weigh or reconstitute inside a ventilated enclosure when the full contents are handled as a dry powder. Reconstitute by adding diluent slowly to the vial wall; do not shake. Wash hands after handling.
Safe Storage
Store the sealed vial at the temperature stated in Section 9 (typically −20 °C for peptides, 2–8 °C for proteins), desiccated and protected from light. Allow the vial to reach room temperature before opening to avoid condensation. Reconstituted solutions: 2–8 °C, protected from light; use within the period established by your laboratory.
Storage Temperature
−20 °C (sealed vial), desiccated and protected from light; 2–8 °C acceptable for short periods
Incompatible Materials
Strong oxidizing agents, strong acids, strong bases (Selleck)

8Exposure controls / personal protection

Occupational Exposure Limits
No data available.
Exposure Controls And PPE
No data available.

9Physical and chemical properties

Physical State
Solid
Appearance
White to off-white lyophilized powder
Properties
Odor
No data available
Ph
Not applicable (solid); aqueous solutions typically pH 4–7
Melting
No data available
Boiling
No data available
Flash
Not applicable (non-flammable solid); combustible organic material
Vapour
Negligible (solid)
Density
No data available (bulk density of lyophilized cake is low)
Solubility
Water: 84 mg/mL (Selleck product page); insoluble in DMSO and ethanol (Selleck product page); Selleck SDS template says 'soluble in DMSO; slightly soluble in water' - the product page values are the m.
Logp
No data available
Decomp
No data available; peptides decompose above about 200 °C
Other
CAS 175175-23-2; H-Glu-Asp-Arg-OH (EDR); C15H26N6O8, MW 418.4. ChemicalBook predicted density 1.63 g/cm3 (computed). Selleck: powder stable 3 years at -20 °C

10Stability and reactivity

Stability And Reactivity
Reactivity
Stable under recommended storage conditions (Selleck)
Incompatible
Strong oxidizing agents, strong acids, strong bases (Selleck)
Decomposition
No data available (Selleck); combustion of peptides yields carbon oxides and nitrogen oxides
Conditions To Avoid
Moisture, heat, light; store -20 °C desiccated
Conditions To Avoid
Moisture, heat, light; store -20 °C desiccated
Incompatible Materials
No data available.

11Toxicological information

Toxicological Information
  • Acute toxicity, oral

    No data available (Selleck: no acute toxicity data available)

  • Acute toxicity, dermal

    No data available

  • Acute toxicity, inhalation

    No data available

  • Skin corrosion/irritation

    No data available

  • Serious eye damage/irritation

    No data available

  • Respiratory or skin sensitisation

    No data available

  • Germ cell mutagenicity

    No data available

  • Carcinogenicity

    No data available; not listed by IARC, NTP, OSHA; not Prop 65

  • Reproductive toxicity

    No data available

  • STOT, single exposure

    No data available

  • STOT, repeated exposure

    No data available

  • Aspiration hazard

    No data available

Routes Of Exposure
Inhalation of dust, skin and eye contact when the vial is opened or the powder is weighed; ingestion through contaminated hands; accidental injection when reconstituted solutions are drawn into syringes.
Symptoms
No specific symptoms are known. Pharmacologically active material: systemic effects consistent with its mechanism of action are possible after accidental injection, ingestion or absorption.

12Ecological information

Ecological Information
No data available (Selleck). Comparable Cayman peptide SDSs: water hazard class 1 (self-assessment).

13Disposal considerations

Disposal Guidance
No data available.

14Transport information

Transport Classification
Note
Not regulated as a dangerous good for transport by road (DOT 49 CFR), air (IATA/ICAO) or sea (IMDG). Not a marine pollutant. Ship refrigerated or frozen as required by Section 7; the coolant (dry ice, UN 1845) is regulated when used.

15Regulatory information

Regulatory Information
Tsca
Not listed (Selleck: not available in public databases)
Carcinogen Listings
Not listed; not Prop 65
Dea
Not a controlled substance
Other
Not an approved drug in the US (Khavinson bioregulator). No SARA 302/313 components. WADA remark: not named; non-approved substance (S0).
Carcinogen Listings
No data available.

16Other information

Revision
October 3, 2026
Sources Consulted
  • Selleck Chemicals
  • Selleck Chemicals product page
  • ChemicalBook
Confidence
medium
Additional Information
No data available.
Back to SDS list
JOIN THE Epic Peptides Lab
Exclusive access for verified researchers only.

Enter your details to access our catalog, COA library,
and research compound database.

By submitting you agree to receive email communications from Epic Peptides Lab You can unsubscribe at any time. All products for in vitro research use only.

15% off any order

Restock alerts, new compounds and fresh lab results.
We’ll email your code straight away – 15% off, one-time use.

Research updates only. Unsubscribe any time.