Safety data sheet. GHS / OSHA HCS 2012 format, 16 sections. Issued by Epic Peptides Lab for the catalogue items listed in Section 1.

Epic Peptides Lab

Safety data sheet · lyophilized powder, vial

Epic Peptides Lab · USA

Document number: PL-SDS-069
Revision: 1.0 · 2026-10-03

GLOW Blend (GHK-Cu + BPC-157 + TB-500)

lyophilized powder, vial

1Identification

Product Identifier

Document Number

PL-SDS-069

Catalogue Items Covered

Id
2893
Name
GLOW BLEND 70MG
Sku
PL-GLOW-70MG-BLD
Id
2891
Name
GLOW BLEND 50MG
Sku
PL-GLOW-50MG-BLD

Recommended Use

Laboratory research use by trained personnel.

Restrictions On Use

Not for human or veterinary use.

Supplier / Distributor

Epic Peptides Lab, USA

Telephone

+1 (787) 468-5291

info@epicpeptideslab.com

2Hazard(s) identification

Classification: Not classified as hazardous under OSHA HCS 2012 (29 CFR 1910.1200) or UN GHS, on the basis of the supplier safety data sheets consulted.
Label Elements: No data available.
Signal Word: No data available.
Other Hazards: No data available.

3Composition / information on ingredients

Description

Lyophilized (freeze-dried) powder or cake in a sealed glass vial with a rubber stopper and aluminium crimp cap.

Composition

Name
GHK-Cu
Full
Copper tripeptide-1; Gly-His-Lys · Cu(II)
Cas
89030-95-5
Formula
C14H22CuN6O4
Conc
71%
Qty
50 mg in GLOW BLEND 70MG; 35 mg in GLOW BLEND 50MG
Name
BPC-157
Full
Body Protection Compound-157; pentadecapeptide
Cas
137525-51-0
Formula
C62H98N16O22
Conc
14%
Qty
10 mg in GLOW BLEND 70MG; 5 mg in GLOW BLEND 50MG
Name
TB-500 (Thymosin β4)
Full
N-acetyl thymosin β4, full-length 43-residue peptide
Cas
77591-33-4
Formula
C212H350N56O78S
Conc
14%
Qty
10 mg in GLOW BLEND 70MG; 10 mg in GLOW BLEND 50MG

4First-aid measures

First Aid Measures

Inhalation: Move the person to fresh air and keep comfortable for breathing. If breathing is difficult or symptoms persist, call a POISON CENTER or doctor.
Skin: Take off contaminated clothing. Wash the skin with plenty of soap and water. If irritation or a rash develops, get medical advice.
Eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do; continue rinsing. If eye irritation persists, get medical advice.
Ingestion: Rinse mouth. Do not induce vomiting. Call a POISON CENTER or doctor if you feel unwell.

Most Important Symptoms And Effects

No specific symptoms are known. Pharmacologically active material: systemic effects consistent with its mechanism of action are possible after accidental injection, ingestion or absorption.

Likely Routes Of Exposure

Inhalation of dust, skin and eye contact when the vial is opened or the powder is weighed; ingestion through contaminated hands; accidental injection when reconstituted solutions are drawn into syringes.

5Fire-fighting measures

Fire Fighting Information: Combustible organic solid; finely divided powder may form dust clouds. Not flammable in the quantities supplied.

6Accidental release measures

Spill And Clean Up Procedures: Avoid dust formation. Dampen spilled powder with water, wipe up with absorbent material, place in a sealed container for disposal and clean the area with water and detergent.

7Handling and storage

Safe Handling: Open vials only in a clean area. Avoid generating or inhaling dust; weigh or reconstitute inside a ventilated enclosure when the full contents are handled as a dry powder. Reconstitute by adding diluent slowly to the vial wall; do not shake. Wash hands after handling.
Safe Storage: Store the sealed vial at the temperature stated in Section 9 (typically −20 °C for peptides, 2–8 °C for proteins), desiccated and protected from light. Allow the vial to reach room temperature before opening to avoid condensation. Reconstituted solutions: 2–8 °C, protected from light; use within the period established by your laboratory.
Storage Temperature: −20 °C (sealed vial), desiccated and protected from light; 2–8 °C acceptable for short periods
Incompatible Materials: chelating agents; No information

8Exposure controls / personal protection

Occupational Exposure Limits: No data available.
Exposure Controls And PPE: No data available.

9Physical and chemical properties

Physical State

Solid

Appearance

Blue to blue-violet lyophilized cake or powder

Properties

Odor: Characteristic (Cayman)
Ph: Not applicable (solid); aqueous solutions typically pH 4–7
Melting: Undetermined
Boiling: Undetermined
Flash: Not applicable (non-flammable solid); combustible organic material
Vapour: Negligible (solid)
Density: No data available (bulk density of lyophilized cake is low)
Solubility: PBS (pH 7.2): approximately 5 mg/mL (Cayman, acetate salt); soluble in DMSO (ChemicalBook)
Logp: No data available
Decomp: No data available; peptides decompose above about 200 °C
Other: Cayman product is GHK-Cu (acetate), CAS 300801-03-0, C14H22CuN6O4 . C2H4O2, FW 462.0; free complex CAS 89030-95-5, MW ~401; product is not flammable; copper content about 16% w/w

10Stability and reactivity

Stability And Reactivity

Reactivity: No dangerous reactions known; no decomposition if used according to specifications (Cayman)
Incompatible: Strong oxidizing agents; strong acids (dissociate the copper complex); chelating agents
Decomposition: No dangerous decomposition products known (Cayman); combustion gives carbon oxides, nitrogen oxides and copper oxides
Conditions To Avoid: Moisture, heat, light (store -20 °C, desiccated, dark)

Conditions To Avoid

Moisture, heat, light (store -20 °C, desiccated, dark); Store -20 °C desiccated, dark; avoid moisture, heat, repeated freeze-thaw

Incompatible Materials

chelating agents; No information

11Toxicological information

Toxicological Information: Acute toxicity, oral
No data available

Acute toxicity, dermal
No data available

Acute toxicity, inhalation
No data available

Skin corrosion/irritation
No irritant effect known (Cayman)

Serious eye damage/irritation
No irritating effect known (Cayman)

Respiratory or skin sensitisation
No sensitizing effects known (Cayman)

Germ cell mutagenicity
No data available

Carcinogenicity
Not listed by IARC, NTP, OSHA

Reproductive toxicity
No data available

STOT, single exposure
No data available

STOT, repeated exposure
No data available

Aspiration hazard
No data available
Routes Of Exposure: Inhalation of dust, skin and eye contact when the vial is opened or the powder is weighed; ingestion through contaminated hands; accidental injection when reconstituted solutions are drawn into syringes.
Symptoms: No specific symptoms are known. Pharmacologically active material: systemic effects consistent with its mechanism of action are possible after accidental injection, ingestion or absorption.

12Ecological information

Ecological Information: No ecotoxicity data from the supplier. Cayman self-assesses water hazard class 1 (slightly hazardous for water). Remark: copper(II) compounds are generally very toxic to aquatic life; keep out of drains even though the supplier does not assign H400/H410.

13Disposal considerations

Disposal Guidance: No data available.

14Transport information

Transport Classification

Note: Not regulated as a dangerous good for transport by road (DOT 49 CFR), air (IATA/ICAO) or sea (IMDG). Not a marine pollutant. Ship refrigerated or frozen as required by Section 7; the coolant (dry ice, UN 1845) is regulated when used.

15Regulatory information

Regulatory Information

Tsca: Not listed
Carcinogen Listings: Not listed
Dea: Not a controlled substance
Other: Not WADA-prohibited. Cosmetic ingredient INCI name 'Copper Tripeptide-1'.

Carcinogen Listings

No data available.

16Other information

Revision: October 3, 2026
Sources Consulted: Cayman Chemical

Cayman Chemical product insert 28259

ChemicalBook

Cayman Chemical product page
Confidence: medium
Additional Information: Copper(II) complex; copper ions are toxic to aquatic organisms, so avoid release of concentrated solutions to drains.

Back to SDS list